RHOBA LAVIA L301
Old productname: RHOBACLEAN 330 WL-THighly concentrated hydro cleaner for waterborne paint systems. Liquid and colourless.
Products
- RHOBA ALTIA – AVIATION
- RHOBA LAVIA – CLEANERS
- RHOBA PURIA – WATER TREATMENT
- RHOBA SUPRA – SURFACES
-
RHOBA UTILA - SERVICE/ACCESSORIES
- Hygiene and occupational safety
- Skin Care
- Dosing and measuring technology
- Accessories
-
Fluid Management-Service
-
Fluid Management
- Properties
- Application
- Application Concentration Working time
- Determination of concentration
- Technical data
- Note
- concentrated and easy to dose
- for cleaning water-based paints
- for cleaning paint lines, atomiser bells, spray guns, etc.
- does not attack material surfaces such as steel, aluminium and non-ferrous metals
- low-foaming application
Very productive concentrate, which is always used diluted with water.
CIP cleaning of lines carrying paint: The cleaning solution is pumped in the circuit to dissolve all lacquer residues. If the desired cleaning effect is not achieved, a further rinse must be carried out (with increased concentration if necessary). Then rinse the pipe system with water.
Manual cleaning: The cleaning solution is applied using a suitable cleaning pad. Then rinse with water.
Due to the large number of lacquer and paint systems and materials, preliminary tests are recommended.
| Application | Concentration | Working time |
| CIP-Cleaning | 1-10 Vol.% | up to 15 min |
| Manual cleaning | up to 50 Vol.% | depending on the type of soiling |
A concentration determination is possible by means of a hand refractometer (faktor = 1.53)
concentration (Vol.%) = [value read] x 1.53
| Appearance | colourless liquid |
| Density at 20 °C | approx. 0.95 g/ml |
| Flash point | > 60°C |
| pH value at 20 °C | approx. 10 |
Check material compatibility in an inconspicuous area prior to use. Follow the manufacturer's cleaning and care instructions!
No liability can be accepted for improper use and any resulting damage