Products

RHOBA PURIA – WATER TREATMENT

RHOBA PURIA S101

Old productname: RHOBAFOAM S

Fast-acting, highly concentrated defoamer concentrate for all aqueous systems. The product is liquid and highly concentrated. Can be used in cold and hot water-bearing systems.

RHOBAFOAM S
  • Properties
  • Application
  • Technical data
  • Note
  • liquid and highly concentrated
  • can be used in cold and hot water-bearing systems

 

RHOBA PURIA S101 is a fast-acting defoamer concentrate for all aqueous systems.

Optimum performance is achieved by adding only very small quantities. Depending on the foaming behaviour, an application quantity of approx. 10 - 80 ml/m³ circulating or treatment water is recommended.

We recommend adding RHOBA PURIA S101 at a turbulent point, if possible, for quick and effective distribution. For maximum efficiency and economy, RHOBA PURIA S101 can be pre-diluted in a ratio of 1-part RHOBA PURIA S101 with 9 parts soft water.

Processing time of this pre-dilution: approx. 10 hours.

In case of constant foam formation, the use of an economical defoamer dosing pump is recommended for cost-saving and production-saving reasons.

Exact application values of RHOBA PURIA S101 will be determined for you by our laboratory and by the application technologists.

Appearence white liquid
Density at 20°C approx.1,00 g/ml

Before use, check material compatibility on an inconspicuous spot. Follow the manufacturer's cleaning and care instructions!

No liability can be accepted for improper use and any resulting damage.