RHOBA PURIA S102
Old productname: RHOBAFOAM VFast-acting concentrated defoamer concentrate for all aqueous systems. The product is liquid and highly concentrated. Can be used in cold and hot water-bearing systems.
Fast-acting concentrated defoamer concentrate for all aqueous systems. The product is liquid and highly concentrated. Can be used in cold and hot water-bearing systems.
RHOBA PURIA S102 is a fast-acting defoamer concentrate for all aqueous systems. Optimum performance is achieved by adding only very small quantities. Depending on the foaming behaviour, an application quantity of approx. 10-80 ml/m³ circulating or treatment water is recommended. We recommend adding RHOBA PURIA S102 at a turbulent point, if possible, for quick and effective distribution.
For maximum efficiency and economy, RHOBA PURIA S102 can be pre-diluted in a ratio of 1-part RHOBA PURIA S102 with 9 parts soft water. Processing time of this pre-dilution: approx. 10 hours.
In case of constant foam formation, the use of an economical defoamer dosing pump is recommended for cost-saving and production-saving reasons. Exact application values of RHOBA PURIA S102 will be determined for you by our laboratory and by the application technologist.
Appearence | lightgreen liquid |
Density at 20°C | approx.1,00 g/ml |
Before use, check material compatibility on an inconspicuous spot. Follow the manufacturer's cleaning and care instructions! No liability can be accepted for improper use and any resulting damage.