Products

RHOBA SUPRA – SURFACES

RHOBA SUPRA C301

Old productname: RHOBACORR KHK 100

Highly concentrated corrosion inhibitor and hardness stabilizer for closed and semi-open cooling water systems.
For passivation of copper and brass.

RHOBACORR KHK 100
  • Properties
  • Application
  • Technical data
  • Note
  • forms an optimal corrosion protection film in the entire system, prevents deposits on pipe walls
  • must not be used in systems containing aluminium or materials containing aluminium
  • shows excellent hardness stabilisation on calcium carbonate and other hardness minerals
  • stabilises water hardness even at thermally stressed points in the process water system
  • works optimally in the pH range 7.5 to 10

RHOBA SUPRA C301 has a safe corrosion inhibiting effect on carbon steel, copper and copper alloys, non-ferrous metals in closed and semi-open cooling and process water systems. The product can also be used for passivation for copper and brass, allowing up to 4 weeks of internal storage.

The dosage depends on many factors, including chloride content, thermal stress, statistical residence time, system equipment, turbidity, alkaline earths, etc.

The concentration in the process water should be 0.5 to 1% and should be added at a turbulent point in the system. For passivation, a 1% solution is used at room temperature. To avoid residues, distilled water should be used.

Appearance yellowish-orange, clear liquid
Density at 20 °C approx. 1.13 g/ml

Before use, check material compatibility in an inconspicuous place.

Follow the manufacturer's cleaning and care instructions! No liability can be accepted for improper use and resulting damage.