Products

RHOBA LAVIA – CLEANERS

RHOBA LAVIA L302

Old productname: RHOBACLEAN 330 WL-V

Concentrated hydro cleaner for paint application equipment and water-based paints

 

RHOBACLEAN 330 WL-V
  • Properties
  • Application
  • Determining the concentration
  • Technical data
  • Note
  • concentrated and easy to dose
  • for cleaning water-based paints
  • for cleaning paint lines, atomiser bells, spray guns, etc.
  • does not attack material surfaces such as steel, aluminium and non-ferrous metals
  • low-foaming application

High yielding concentrate, which is always used diluted with water.

CIP cleaning of lines carrying paint: The cleaning solution is pumped in the circuit to dissolve all lacquer residues. If the desired cleaning effect is not achieved, a further rinse must be carried out (with increased concentration if necessary). Then rinse the pipe system with water.

Manual cleaning: The cleaning solution is applied using a suitable cleaning pad. Then rinse with water.

Due to the large number of lacquer and paint systems and materials, preliminary tests are recommended.

Application Concentration Contact time
CIP-Cleaning 5-15 Vol.% up to 15 min.
Manual cleaning up to 50 Vol.% depending on the type of soiling

 

A concentration determination is possible by means of a hand refractometer (faktor = 2.00) concentration (Vol.%) = [value read] x 2.00

Appearance colourless liquid
Density at 20 °C approx. 0.95 g/ml
Flash point > 60°C
pH value at 20 °C approx. 10

Before application, test material compatibility at an inconspicuous area. Follow the cleaning and care instructions provided by the manufacturer.

We cannot be held liable for improper use and resulting damages.